Oldie moldy records are something of a cliche, but apparently in the land of Goshen (Orange County), old mortgage records are literally molding.

So apparently now that this has been discovered, the basement records room has been closed for cleaning.

One wonders why records were put IN the basement to begin with since that’s one of mold’s favorite places. But other locations in the Goshen Government Center probably would fare no better since there’s a leaky roof involved. I can’t imagine how they forgot to run dehumidifiers in the moldy records room.

Anyway, they’re taking steps, though it isn’t clear what those steps are. Apparently everything is already on microfiche (wait, not digital? how 80s of them…) so they’re not too concerned about the hard copies. Seems like someone should get down there and start scanning everything over to digital before mold hits the microfiche too…

src: http://www.recordonline.com/apps/pbcs.dll/article?AID=/20090829/NEWS/908290324

As exposure can lead to nasal stuffiness, eye irritation, wheezing, or skin irritation, fever and shortness of breath, the first day of school at Hearst Elementary School in Pleasanton was cancelled due to mold. Mold was found between stucco and drywall, and behind furniture in 4 buildings. Remediation is moving forward; and in the meantime, spaces deemed free of mold are being readied for students for a later “first” day of school on Wednesday.

Condensation has created mold in some classrooms of the afflicted G building of Mt. Vernon Township High School. Earlier mold issues have been corrected, supposedly but we all know that any ongoing moisture situation will cause an ongoing mold situation, given the right environmental conditions for mold.

Humidity in the classroom has caused condensation on tables, desks, chairs, floors, walls and equipment, which eventually means mold on tables, desks, chairs, floors, walls and equipment. The situation is being attributed to humid conditions after the air conditioning was turned off. Hopefully the in-house maintenance (wiping the affected pieces down with wipes) and removing the humidity will address the situation.

However, an inspection would reveal if there are soft surfaces which may have been affected, which wipes would not be able to address adequately.

Environmental Management Branch
275 E. Main St., HS1C-D
Frankfort, Kentucky 40621
Phone: (502) 564-4856
E-mail

What are molds and where are they found?

Molds are fungi found both indoors and out, almost everywhere in the environment. They can grow all year long and grow best in warm, damp and humid conditions. Molds spread by making spores that can survive harsh environmental conditions that normally do not support mold growth.

In the home, mold is almost always present in the air and grows best in damp areas with high humidity levels, like bathrooms and basements. While there are perhaps thousands of species of mold, most common indoor molds include Cladosporium, Penicillium, Alternaria and Aspergillus.

How can I recognize mold?
Moldy walls and ceilings may be discolored or show signs of water damage. Green or black spots also may appear on walls. Mold has a musty, earthy smell or a foul stench.

How are people affected, and what can be done to decrease exposure?
Allergy sufferers are usually most affected with mold exposure. Symptoms may include nasal congestion, itchy or watery eyes, wheezing or skin irritation. More severe reactions may include fever or shortness of breath. People with health concerns that could become worse as a result of mold exposure should contact a health care provider for treatment and advice.

To decrease exposure to mold in the home, keep the humidity level of the home between 40-60 percent. Air conditioners and dehumidifiers can also help lower indoor humidity. Always use exhaust fans when showering and cooking. Mold retardants for interior house paint are available at most home improvement stores and, when mixed with paint, reduce mold growth on walls.

How can I test for mold in my home?
Concerned homeowners should test their homes for mold. Mold test kits can be purchased at most home improvement stores. Homeowners also may hire specialized mold consultants to conduct home mold test. When found, mold should promptly be removed.

How can I clean up mold in my home?
When mold growth is limited to a small area, most homeowners can clean up the problem themselves. It is important to take steps for your safety when cleaning up mold.

Protect eyes with glasses or goggles. Wear rubber boots and waterproof gloves and wear outer clothing that can be washed afterwards.

Be sure the area is well ventilated before beginning. Remove and dispose of all porous items that are wet or previously had been wet for more than 48 hours that cannot be cleaned and dried. This includes carpet and carpet padding, upholstery, wallpaper, drywall, floor and ceiling tiles, insulation, clothing, paper, wood and food.

Hard surfaces may be cleaned using soap and water.
For more serious flooding and where mold infestation is severe, consider contacting a mold remediation consultant. Be sure when hiring a consultant to check references from previous work.

How do I keep the mold from coming back?
The key to mold prevention is moisture control. For flooding damage, ensure that the home is properly cleaned and dried out using the steps above. For small spots, remove the source of moisture. Mold cannot grow without a source of water. By removing the water source, the homeowner can ensure mold growth will not return. If mold growth persists, consider contacting a mold remediation professional for further advice. Moisture also can be hidden in the home and become a source of mold.

What is toxic mold?
The term toxic mold is incorrect. Certain molds may produce toxins called mycotoxins, but the molds themselves are not toxic.
The bottom line with mold contamination is that all mold should be removed from the home, regardless of what type it is. Any mold has the potential to cause negative health effects if left unchecked.

What does the government do?
Kentucky has not established laws or regulations concerning mold contamination. Currently, no federal standards exist for permissible exposure limits. With no statutes in place for mold exposure or remediation, the Cabinet for Health and Family Services has no authority over such issues.

http://chfs.Ky.Gov/dph/info/phps/mold.htm

A $25,000 grant is being directed toward the unfinished Grantville community center which had been originally slated for completion by 2006. Disrepair is reflected in mold damage: plumbing, replacing old wallboard, and putting in new carpet, heating and air conditioning, and a counter and sink. The mold problem is due to a lack of moisture control. (What have we been saying all along?)

The building will be closed until the economy allows reparations to make the building safe.

At Trinity Christian Academy, a private school, several classes have been relocated because of possible mold issues at the school. The potential mold situation is attributed to recent rainfall and high levels of humidity. Apparently school officials informed parents that the building is being checked, but that precautions will not interrupt students.